System Overview ELPRO Cloud

The following article provides you with an overview of available measurement modules, which are compatible with the ELPRO Cloud Software.

Last Updated: February 11, 2021

Table of Content
  1. ELPRO Cloud System Overview
  2. Communication Module RBR
  3. Measurement Modules:
    1. Temperature Measurement Module ECOLOG-PRO 1NTR

    2. Temperature Measurement Module ECOLOG-PRO 2PTR

    3. Humidity & Temperature Measurement Module ECOLOG-PRO 1THR

  4. ELPRO Cloud Temperature Monitoring Starter Kit
  5. IoT Devices: LIBERO Gx Real-time data logger
    1. LIBERO GS
    2. LIBERO GL
    3. LIBERO GE
    4. LIBERO GH
    5. LIBERO GF
  6. FAQ

1. ELPRO Cloud System Overview

The ECOLOG-PRO measurement and communication modules described are used for temperature monitoring. The measured values are transmitted to a monitoring software (ELPRO Cloud), which stores and analyzes the data, provides alerts if alarm limits are violated, and generates reports. The system provides superior visibility and transparency in meeting GxP requirements. The sensor-based monitoring software is easily accessible via a web browser and is also used to configure the measurement modules and sensors. 

2. Communication Module RBR

The ECOLOG-PRO RBR module is the link between the wireless measurement modules of the ECOLOG-PRO series and the monitoring software. The data is transferred to the software over the Internet using an Ethernet connection (via RJ45 plug).

3. Measurement Modules

The following measurement modules are compatible with the ELPRO Cloud Software.

3.1 Temperature Measurement Module ECOLOG-PRO 1NTR

ECOLOG-PRO 1NTR is a measurement module with an internal temperature sensor. Communication from this module with the ECOLOG-PRO RBR is via radio signal.

3.2 Temperature Measurement Module ECOLOG-PRO 2PTR

ECOLOG-PRO 2PTR is a measurement module with the possibility to connect to two external temperature probes (to be bought separately).

3.3 Humidity & Temperature Measurement Module ECOLOG-PRO 1THR.

ECOLOG-PRO 1THR is a wireless measurement module with one external combination probe for temperature and relative humidity (to be bought separately).

4. ELPRO Cloud Starter Kit

The ELPRO Cloud Starter Kit contains everything you need to get started with ELPRO Cloud:

  • 1 communication module ECOLOG-PRO RBR
  • 2 temperature sensors ECOLOG-PRO 1NTR, incl. batteries
  • Power supply unit for the communication module
  • Ethernet cable 3m to connect the communication module to the internet*
  • 2 vouchers to license the 2 sensors for one year each in a standard configuration
  • Quick installation guide
  • Safety data sheets ECOLOG-PRO RBR and ECOLOG-PRO 1NTR

The ELPRO Cloud Starter Kit is available in two versions. The version operating in the 868 MHz frequency band is for the European market, while the version running on 915 MHz is for the US market.

* For cable lengths exceeding 3 meters, use shielded Ethernet cables.

5. IoT Devices: LIBERO Gx Real-time data logger

5.1 LIBERO GS

Wireless Data logger with internal temperature sensor. Temperature range -30 °C..+70 °C, single-use device, lifetime: 110 days, memory capacity: 16'000 values.

Battery powered. Exchangeable Alkaline Battery (one time batteries).

5.2 LIBERO GL

Wireless Data logger with internal temperature sensor. Temperature range -30 °C..+70 °C, multi-use device, lifetime: 14 months, memory capacity: 16'000 values.

Battery powered. Exchangeable Alkaline Battery (one time batteries).

5.3 LIBERO GE

Wireless Data logger with internal sensor and external Pt100 probe (probe not included). Temperature range -200 °C..+400 °C, multi-use device, lifetime: 14 months, memory capacity: 16'000 values.

Battery powered. Exchangeable Alkaline Battery (one time batteries).

5.4 LIBERO GH

Wireless Data logger with internal temperature and humidity sensor. Temperature range -30 °C..+70 °C, multi-use device, lifetime: 14 months, memory capacity: 16'000 values.

Battery powered. Exchangeable Alkaline Battery (one time batteries).

5.5 LIBERO GF

Wireless Data logger with internal temperature sensor. Temperature range -30 °C..+70 °C, multi-use device, lifetime: 14 months, memory capacity: 16'000 values.

Battery powered. Exchangeable Lithium Battery for frozen applications (one time batteries).

6. FAQ

  • Where can I buy additional equipment? Additional communication bridges as well as additional wireless sensors 1NTR can be ordered online on our web shop.
  • What is the pricing of the equipment? The current prices of the equipment is listed in our web shop