<img alt="" src="https://secure.perk0mean.com/184386.png" style="display:none;">
Skip to content
English
CREATE SUPPORT TICKET
  • There are no suggestions because the search field is empty.

Select a communication mode

This articles explains the communication modes for ELPRO IoT Data Logger

The following communication modes are configurable for LIBERO Gx and ECOLOG-PRO xG device series.

 

Communication Modes for LIBERO Gx
Longlife Mode Standard Mode Visibility Mode
2h Communication Interval

1h/2h Communication Interval*

 30min Communication Interval
Designed for long runtimes** Designed for general Logistics** Designed for maximum visibility**

Can extend runtime by 20% due to lower modem activity

 Balanced runtime

Attention: May reduce runtime by 30% due to higher modem activity!

*Smart communication interval; Communicates depending on the environmental conditions
**Besides communication intervals, other parameters help to achieve optimal results

 

Communication Modes for ECOLOG-PRO xG
Standard Mode Performance Mode

1h/2h Communication Interval*

30min / 2h Communication Interval*

Designed for standard storage application**

For increased need for updated data**
Balanced runtime

Attention: May reduce runtime by 20% due to higher modem activity!

*Smart communication interval; Communicates depending on the environmental conditions
**Besides communication intervals, other parameters help to achieve optimal results

 

Important Note:
A Missing Communication Warning can be triggered after 1 (strict), 5 (recommended), or 10 (tolerant) missed intervals. For all modes (Longlife, Standard, Performance), these intervals are always calculated against a 120-minute baseline, even if the configured communication interval is shorter.

The only exception is LIBERO Gx in Visibility Mode, where the baseline is 30 minutes.