How does the menu work?

Workarounds

  • Menu can be accessed via “Info/Menu” (press for >3 seconds)

    • Go to "GET CONFI" to PULL Configuration
    • Go to “PUSH.DATA” to PUSH Communication

    • Go to “MODEM.OFF” to switch modem off (e.g. for return of logger via airline)

    • Go to “MODEM.ON” to switch modem on (e.g. if device is in flightmode)

What menu items are available in which state

 

State

Menu item

CONFIG

START

DELAY

TRANSIT

PAUSE

ARRIVE

STOP

GET.CONFI

trigger communication to pull (new) configuration from cloud

✔️ ✔️

 

 

 

 

✔️

PUSH.DATA

trigger communication

 

 

✔️ ✔️ ✔️ ✔️ ✔️

RADIO.ON

Terminates flight mode (manually)

✔️ ✔️ ✔️ ✔️ ✔️ ✔️ ✔️

RADIO.OFF

The communication turns off

  • state changes from CONFIG / START to SHELFLIFE
    (configuration remains if device started again)
  • state changes from ARRIVED / STOP to SLEEP
    (device returns to STOP mode if started again)
✔️ ✔️

 

 

 

✔️ ✔️

LAST COM

show last communication time

✔️ ✔️ ✔️ ✔️ ✔️ ✔️ ✔️

ALARM.ON

activate alarm limits if configured

(state changes from PAUSE to TRANSIT)

 

 

 

 

✔️

 

 

ALARM.OFF

deactivate alarm limits if active

(state changes from TRANSIT to PAUSE)

 

 

 

✔️

 

 

 

MARK

set marker
(not logged in cloud in version 1)

 

 

 

✔️

✔️

✔️

 

EXP DATE

show the expiry date of the device

✔️ ✔️ ✔️ ✔️ ✔️ ✔️ ✔️

FCT.RESET

reset device and confirm by pressing Info button again

⇒ a reset device has to be paired again in cloud
✔️ ✔️

 

 

 

 

✔️

Sensors

Show information about internal temperature, external temperature (if any), relative humidity (if any), light and tilt.

✔️ ✔️

✔️

✔️

✔️

✔️

✔️

About

Show information about firmware, config ID, IMEI, last communication, expiration date, and battery voltage.

✔️ ✔️

✔️

✔️

✔️

✔️

✔️