The EU Good Distribution Practices (GDPs) guidance, including ongoing addendums and Q&A documents have been the basis for many other national GDP documents in other countries. Put simply, the EU has led the way globally on GDPs. However, with the emergence of many other GDPs around the world, practitioners are left wondering how to find common ground and approaches when shipping globally. This, will continue to be ongoing challenge for all of us, for years to come.
Still in 2018, there continues to be further definition of GDPs in Europe, specifically related to temperature control. One such contentious subject or question is:
No. According to the Guideline on declaration of storage conditions (CPMP/QWP/609/96 Rev. 2), Marketing Authorisation Holders have to provide stability data for storage conditions at 25°C / 60% relative humidity (RH), or 30°C / 65% RH (long term) and 40°C / 75% RH (accelerated), in order to justify not including a statement in the medicinal product labelling.
This stability data is generated according to the temperature and humidity conditions of climate zone I (temperate zone) and II (Mediterranean/subtropical zone) in Europe. For more information, see the World Health Organization Expert Committee on Specifications for Pharmaceutical Preparations forty-third report, Annex 2: Stability testing of active pharmaceutical ingredients and finished pharmaceutical products.
No labelling statement means that controls should be in place to maintain conditions relevant to climate zones I and II. Consequently, the temperature should be monitored during storage and transport. Appropriate limits should be set for temperature monitoring to ensure that product stability is not adversely affected.
In an effort to offer practical interpretation of global GDPs, with EU guidance being the basis, ELPRO and PTS Training Service have put together a booklet entitled ‘Compact GDP’ that offers concise explanation of what the GDP requirements are for the areas outlined below, including:
Let’s breakdown and examine some of these important topics.
Qualification (proof of suitability for rooms, systems, facilities) and validation (proof of suitability of procedures, processes and methods) are very important elements of the Good Distribution Practice (GDP).
This also includes the qualification of service providers, monitoring devices, monitoring software and also transport routes.
If deviations occur, for example due to errors, they must be reported immediately and investigated whether and to what extent the deviation has an influence on product quality and patient safety.
Thereafter, follow-up actions are defined (Corrective Actions and Preventive Actions, CAPA) to prevent this or similar errors from recurring in the future. All quality-relevant processes and procedures must be documented comprehensibly.
Qualification and Validation is a critical topic with many facets. The ‘Compact GDP’ booklet goes into deeper detail.
Risk management includes all measures for the systematic identification, evaluation, monitoring and control of risks. After the identification of risks a distinction is made between critical steps, which represent a high risk, (for the quality of the active substance or medicinal product1) and less critical or uncritical steps, which represent only a low risk to the product. Zero risk or 100% security does not exist.
Following the identification of possible risks, the most limited resources (time, money, employees) should be distributed sensibly according to the criticality of the individual steps. This results in a more effective use of resources while maintaining quality. Risk management is an important GDP requirement. The ICH guideline Q9 may be used for the implementation of the risk management measures. During qualification and validation risk assessment is used to define the scope of testing.
Temperature mapping is an essential part of the qualification of the warehouse. It is usually integrated into the qualification during OQ (operational qualification) in the empty state and in the PQ (performance qualification) under regular operating conditions in summer and winter. The temperature in the warehouse must be monitored continuously in points of maximum thermal fluctuation.
The first step to a mapping layout is the creation of a general grid using empirically established data including grid spacing.
A deviation from these empirically established grid spacings should be scientifically or experimentally justified, for example by comparison with storage spaces of similar construction and comparable air conditioning systems, or by a preliminary thermographic investigation.
The mapping layout is then completed risk-based using the following criteria:
To learn more about GxP Warehouse mapping and qualification, visit ELPRO’s services page.
In recent years, there has been a spate of new or updated regulatory guidance on GMP and GDP for Active Pharmaceutical Ingredients (APIs) and excipients as well. Due to cases of adulterated ingredients or faulty supply chains, regulators and other industry associations have collaborated to put pressure on suppliers and manufacturers to tighten their processes and carry out the due diligence to ensure quality control of the entire lifecycle and production of medicines.
«Manufacturers need to get ahead of the GDP curve by working closely with their downstream partners to ensure they understand GDP requirements. Often, these partners will not fully understand their obligations. For example, what does it mean to validate a temperature-controlled environment? Simply having a thermostat is absolutely not acceptable», says Mark Paxton, CEO of Rx360.
Read more about GDP for APIs and requirements for API suppliers and pharmaceutical manufacturers.
Getting GDPs right for your supply chain takes time and research. There is not one right answer for every company or every supply chain. First you must understand the desired outcome of the GDP guidance, i.e. what exactly is the requirement. Then, sit down with your QA and logistics teams to decide how to adapt your current processes, or perhaps consider new technology, that allows your company to meet the requirements.
Request remote maintenance via TeamViewer