This articles explains the communication modes for ELPRO IoT Data Logger
The following communication modes are configurable for LIBERO Gx and ECOLOG-PRO xG device series.
Communication Modes for LIBERO Gx
|
|
||
| Longlife Mode | Standard Mode | Visibility Mode |
 |
 |
 |
| 2h Communication Interval |
1h/2h Communication Interval* |
30min Communication Interval |
| Designed for long runtimes** | Designed for general Logistics** | Designed for maximum visibility** |
|
Can extend runtime by 20% due to lower modem activity |
Balanced runtime |
Attention: May reduce runtime by 30% due to higher modem activity! |
*Smart communication interval; Communicates depending on the environmental conditions
**Besides communication intervals, other parameters help to achieve optimal results
Communication Modes for ECOLOG-PRO xG
|
|
|
| Standard Mode | Performance Mode |
 |
 |
|
1h/2h Communication Interval* |
30min / 2h Communication Interval* |
|
Designed for standard storage application** |
For increased need for updated data** |
| Balanced runtime |
Attention: May reduce runtime by 20% due to higher modem activity! |
*Smart communication interval; Communicates depending on the environmental conditions
**Besides communication intervals, other parameters help to achieve optimal results
Important Note:
A Missing Communication Warning can be triggered after 1 (strict), 5 (recommended), or 10 (tolerant) missed intervals. For all modes (Longlife, Standard, Performance), these intervals are always calculated against a 120-minute baseline, even if the configured communication interval is shorter.
The only exception is LIBERO Gx in Visibility Mode, where the baseline is 30 minutes.