ELPRO Datalogger – Accessories

D | E | F

	ECOLOG: Brackets \| Alarming \| Miscellaneous
	HOTBOX SE: Miscellaneous
	HAMSTER: Miscellaneous

ECOLOG mounting brackets

Mounting sheet with 2 screws

Part No.: 2804-A

Holding plate can be padlocked
(padlock not included in scope of delivery)

Part No.: 2804-E

Holding plate with DB15 socket fixation
Stainless steel
Without DB15 connector, maximum 2-3 cables

Part No.: 2804-B

Holding plate size 33x26 cm with fastening chain
A5 plastic pocket
Aluminum

Part No.: 2804-D

Datalogger Accessories

Holding plate for TNx with terminal screws for 2 digital inputs
4 probes
Alarm
Stainless steel
Additional RS232 connection

Part No.: 2804-CR

Holding plate for TPx with terminal screws for 2 digital inputs
2 probes
Alarm
Stainless steel
Additional RS232 connection

Part No.: 2801-CR

Holding plate for THx with 2 DB15 connectors for external probes
Terminal screws for 1 digital input
Alarm
Stainless steel
and DB15 / RS232 connection

Part No.: 2805-CR

Protection cage for ECOLOG TH1, stainless steel

Part No.: 2804-F

Protective roof for ECOLOG TH1
With fixation bracket lockable
Stainless steel, no weather protection
Only for splash-water protection and drip proof indoor applications

Part No.: 2804-G

	IP65 casing for Ecolog (without terminals via DB15 or Lemo) 1-4 probes Synthetic shock-resistant (WxHxD 22x18x11 cm) 3x cable gland (option 5x) PG7	Part No.: 2350-B

	IP65 casing for ECOLOG (TNx) 1-4 probes at terminal holding device, Synthetic shock-resistant (WxHxD 22x18x11cm) Lid, window and quick-release fastener 3x cable gland (option 5x)	Part No.: 2350-C

	IP65 casing for Ecolog TH2For 1-2 universal probes Synthetic shock-resistant (WxHxD=22x18x11cm) Connection cable 3215 (separate position) mounted Tested as one unit 3x cable gland	Part No.: 2350-D

	Housing IP66 for ECOLOG TP2 1-2 sensors on screw terminal Plastic shockproof (LxHxD 22x18x11cm) Cover transparent with quick lock 3x cable clamps	Part No.: 2350-F

Protection housing for TH1
For steam cleaning
Cover opened for normal operation
Size 120x200x86 mm
With hinge and snap fastener
Inclusive wall mounting straps

Part No.: 2352-A

ECOLOG Alarming

Flasher lamp
Bright xenon flash light red
With connection cable 3 m
Including mains adapter 220V/12V

Part No.: 2311-B

Flasher lamp with siren and flash light
Connection cable 2 m
Including mains adapter 220V/12V

Part No.: 2311-C

Alarm flash on terminal box with relay
Output and power supply 230VAC/24VDC
And 5 m connection cable to Ecolog

Part No.: 2313

Receiver for radio alarm, configurable
With 2x relays, resetSummer and day/night switch
Day alarm delay setting 20 minutes
Connection 240V

Part No.: 2340-R

Sender for radio alarm
Each sender unique
Range: 30 - 50 meters,
Fits on bracket 2804-C/CR or 2805-CR
Battery-operated

Part No.: 2340-T

Automatic telephone dialing unit analogue connection
two channels, up to seven telephone numbers
Programmable redialing function and recordable voice text
With rechargeable battery and charger
Suitable for connection to alarm contacts of ECOLOG dataloggers or alarm interface
with accu and power supply
with 5 meter alarm cable
with 5 meter phone cable RJ11
and manuel

Part No.: 2341-B

ECOLOG miscellaneous

Protocol printer SEIKO 414 (thermopaper 110mm)
With battery pack and charger

Part No.: 2319

Printer cable for serial printer evaluation
RS232: 15F/9M
Format: Seiko 414

Part No.: 2309-F

Set for cooling transportation (lorry)
Datalogger TN3-P with printer in waterproof housing IP66 (with 3 PG7) with a NTC
Temperature sensor L=10m, printer supply 10..30VDC by the electrical system from the lorry

Part No.: 2560-A

Set for cooling transportation (lorry)
Datalogger TN3-P with build in printer
Installed in the driver's cab with a temperature sensor NTC, L=10m, 10..30VDC by the electrical system from the lorry

Part No.: 2560-B

PC data cable ECOLOG evaluation at PC
RS232, DB15F / DB9F

Part No.: 2318

USB to RS232 converter connecting
ELPRO Datalogger from PC with USB connection
For all ELPRO Datalogger, consists of converter, CD and manual, only for direct connection to PC USB-port

Art. Nr.: 2317-USB

Lithium battery 3.6V-1.9Ah set of 2, size AM3/LR6/AA
Temperature range: -55°..85°C
Storable for at least 5 years

Part No.: 2820

DB15 coupling with integrated NTC temperature probe
Range -35°..+55°C
With soldered insert
AMP metal
For ECOLOG TN4

Part No.: 3032-A

Coupling for alarm reset, for ECOLOG TN2/3-P only

Part No.: 3032-EA

DB15 coupling AMP metal
For ECOLOG TN2/3-P only with soldered insert
With integrated Start / Inpos (digital input = ON)

Part No.: 3032-IS

Intermediate piece DB15 connector to 2x LEMO connectors NTC
For ECOLOG TNx
2 cables ends for S1 + S2, L=10cm

Part No.: 3032-VN

Intermediate piece for ECOLOG THx
Converts S1/2 to S3/4
DB15 coupling and connector
AMP metal
To connect cable
3215-Sx as probe pair 3/4

Part No.: 3215-DX

	Intermediate piece DB15 connector to 2x connectors NTC For ECOLOG THx 2 cable ends for S1 + S2 length 10cm	Part No.: 3215-VN

HOTBOX SE miscellaneous

Sensor connectors

	Connector with terminals 4 pin (for 2x NTC probes)	Part No.: 2540-P4
	Connector with terminals 5 pin (for 2x4-20mA)	Part No.: 2540-P5
	Connector with terminals 7 pin (for 2xDC signals)	Part No.: 2540-P7
	Connector mounting at sensor (without material)	Part No.: 2540-B

Temperature probes -50°..+140°C

	Drop probe, to stick on, thin, D=2mm, fast 3055-L03	Part No.: 3055-L03
	Submergible probe flexible (only up to 110°C)	Part No.: 3093-L03
	Universal temp. probe DS=6mm, LS=50mm	Part No.: 3090-L03
	Further types, up to 50m cable, from ELPRO

HAMSTER miscellaneous

Wall bracket for the HAMSTER

	Wall bracket for the HAMSTER, lockable, including padlock	Part No.: 4910

PC data cable for HAMSTER

	PC data cable for HAMSTER, for PC evaluation, RS232, DB9	Part No.: 4912