 |
Q-tag 2: Overview | Functions | Archives | Specifications |
|
 |
Best cost-performance ratio |
|
Low-priced temperature monitoring for transport |
|
Stand-alone, small unit for temperature monitoring |
|
Simple handling, clear identification |
|
Exact temperature measurement |
|
Immediate on-site recognition of any threshold violations |
|
5 different programmable threshold values |
|
Clear display of alarm states |
|
Battery life approx. 2 years |
|
No PC or software required |
|
Size (WxHxD): 57x60x9.5mm |
| Functions and display |
|
Alarm Indicator The indicator shows, which time/tempera-ture conditions have been violated. The first violated condition is shown in the first column. All further violated conditions will be shown in the second column. |
|
Time Conditions The transportation time, programmed between 1 to 48 days according to customer requirements, is subdivided into 24 time segments. Example: one time segment: 6 hours total transportation time: 6 days |
|
Alarm Time Indicator The arrow together with the word ALARM shows when the alarm conditions have been violated. (in which time segment after the start) |
|
Measurement Zones The time/temperature parameters can be programmed according to customer requirements. (cumulative or single event) Example: < 0°C Immediate alarm (freeze danger) 0°-21°C Authorized transport and storage temperature >21°C Alarm after 72h >34°C Alarm after 2h |
|
| Photocopy or Scan
for your Archives |
| The display of the Q-Tag2 is easy and clear and can be archived permanently as per your QS-instructions with a photocopy or scan. The following features are shown at a glance: | |
|
Time/Temperature conditions |
|
Transport time per segment / total transport time |
|
At what time the alarm has been violated |
|
What kind of condition has been violated |
|
Which was the fist alarm and which followed |
|
ID number |
|
|
| General Specifications Q-Tag 2 and Q-Tag 2R |
|
Storage temperature: -20° C … 70° C -4° F … 160° F |
|
Operatine temperature: -20° C … 55° C -4° F … 130° F |
|
Temperature measuring accuracy: +/- 0.5° C +/- 1° F |
|
Time measuring accuracy: 1/- 10 sec/day |
|
Storage before START: 18 months |
|
Programmable temperature ranges: 5 |
|
Programmable transportation time: 24 h … 48 days |
|
Initial delay: 4 h max. |
|
Attachement: double sticker tape on backside |
|
Time/Temperature parameters for storage and Alarm ranges are factory-set according to customer requirements. Sticker can be individually designed as well. |
|
| Further Specifications Q-Tag 2 |
|
Use: Once only |
|
Identification: Each Q-Tag has one ongoing identification number and barcode on the main label and on a tear off twin label. |
|
Data retention after STOP: 6 months |
|
Display: Can be photocopied or scanned |
|
| Further Specifications Q-Tag 2R |
|
Use: Repeated use, for example cold boxes which are always returned to the sender |
|
Restart: Together with a restart set the Q-Tag2R can be used as often as you want for 18 months. |
|
Display: Can be photocopied or scanned |
|
Your advantage: Used repeatedly, the Q-Tag 2R can reduce the costs of each shipment! |
|
Last changes: 10.09.03
Contact: