Datalogger HOTBOX-SE - ELPRO BUCHS AG

D | E | F

	Applications:	Pressure \| Climate data \| Fresh air
	Sensors \| Accessories \| Datasheets \| Software

Hotbox SE

Part No.: 2501

2 channels: NTC temperatures -50° .. + 140°C
2 channels: signals 4 .. 20mA
2 channels: DC voltages (progr., +/- )

(DC ranges can be set for hygroclip humidity and temperature sensors)

For recording, 1-4 channels can be selected from the total 6 channels. Variety of data can be recorded and displayed simultaneously.

Simple configuration, 64,000 measured values, large display, sensor supply by datalogger, alarm possibilities etc.Ideal for autonomous recording of values measured by sensors and signal transmitters:

	Pressure in one process
	CO2 concentration in the environment
	Gas concentration such as O2 or other gases
	Electric values such as current and voltage
	Temperatures
	Rel. humidity and temperature combined
	Air speed
	Water depth (groundwater, river water etc.)
	Strength of a force sensor
	Differential pressure in a clean room
	or any other combination

The sensors are supplied by integrated batteries or by an external supply.
A special procedure optimizes battery consumption.

Recording pressure at compressors

For optimization, high pressure, low pressure and 2 temperatures are recorded simultaneously.

Material:

1x	HOTBOX SE universal datalogger	2501
1x	Pressure sensor -1..9 bar	3280-A
1x	Pressure sensor -1..24 bar	3280-B
2x	NTC temperature sensor -50°..+140°C	3055-L03
1x	Connector for 2 NTC sensors	2540-P4
1x	Connector for 2 pressure transmitter	2540-P5
2x	Sensor mounting and test	2540-B

Recording climate data

Humidity and temperature in one process with wind velocity and an additional outdoor temperature are recorded simultaneously.

Material:

1x	HOTBOX SE universal datalogger	2501
1x	Hygroclip sensor humidity / temperature	3088-A
1x	Extension cable for hygroclip with connector	3216-L01
1x	Sensor for air velocity 0..20m/s, 4..20mA	3264-D
1x	Connector for 2 sensors 4..20mA	2540-P5
1x	NTC temperature sensor -50°..+140°C	3090-L10
1x	Connector for 2 NTC sensors	2540-P4
2x	Sensor mounting and test	2540-B

Fresh air monitoring

How much electric current does the air conditioning plant require?
How high is the air speed in the air channel?
These values and 2 temperatures are recorded.

Material:

1x	HOTBOX SE universal datalogger	2501
1x	Sensor for air speed. 0..20m/s, 0..2V	3264-C
1x	Current clamp Mini2 for 1..100 Amp AC	3268
1x	Connector for 2xDC signal sensors 7P	2540-P7
2x	NTC temperature sensors -50°..+140°C	3090-L10
1x	Connector for 2 NTC sensors	2540-P4
2x	Sensor mounting and test	2540-B