 |
|
|
|
|
|
 |
|
D | E | F |
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
 |
|
| ECOLOG-NET, the LAN
/ W-LAN network datalogger |
|
|
| ELPRO datalogger series ECOLOG-NET
are designed for recording temperature and relative humidity via a
network. |
|
|
| The data is stored in the internal
memory and can be loaded to the PC via the LAN network. The system
offers the very highest of data safety as the datalogger continues
logging for months even in the event of a power failure running from
its own internal lithium battery. Multiple level alarm features are
built in for local or network alarming in for any user set out of
range conditions. |
| |
|
| Primary applications: |
General technical data: |
 |
Warehouses, general
cold-storage |
|
Cold storage areas
for pharmaceutical products |
|
Display cases and
store rooms for food products |
|
Museums and galleries |
|
Technical processes |
|
Air-conditioned
areas |
|
|
LAN / W-LAN with
TCP/IP protocol |
|
USB connection for
local communication |
|
64,000 data memory
with measured values |
|
External power supply
for LAN network required |
|
Battery supply in
case of power failure |
|
Programmable interval
and alarm condtitons |
|
All datalogger “function”
and “save” memory mode |
|
|
|
|
|
|
|
 |
|
 |
|
|
|
|
 |
| |
 |
|
| PoE-diagram: Power over Ethernet |
|
| The external supply is necessary for the LAN/WLAN
communication, external alarms and the online monitoring. In case
of an interruption of circuit the system changes over automatically
to the internal battery and continues to save datas. Even a local
alarm over inserted DC switch is still possible. |
|
| PoE (power over Ethernet) is if always possible
recommended. |
|
 PoE-splitter
for ECOLOG-NET |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
 |
|
| Datalogger ECOLOG-NET
LP4 |
Part No.: 2701 |
|
|
|
|
4-Channel datalogger
with LAN interface and display |
|
|
Temperature range -200°C
to +610°C |
|
|
3-wire or 4-wire PT100
sensors (RTD) |
|
|
Suitable for cable lengths
up to 70 meter (low electrical interference) |
|
|
Multifunction alarm output:
LAN, LCD, buzzer, local connection |
|
|
Rugged metallic case |
|
|
|
|
|
ECOLOG-NET LP4 as WLAN-type
WP4 (standard IEE802.11b) |
Part No.: 2703 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
 |
|
| Datalogger ECOLOG-NET
LH2 |
Part No.: 2705 |
|
|
|
|
4-Channel datalogger with
LAN interface and display |
|
|
Humidity and temperature
recording |
|
|
2x external combined sensors,
cable lengths up to 20 meters (total length) |
|
|
Multifunction alarm output:
LAN, LCD, buzzer, local connection |
|
|
Rugged, metallic case |
|
|
|
|
|
ECOLOG-NET LH2 as WLAN-type
WH2 (standard IEE802.11b) |
Part No.: 2707 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
 |
|
| Set ECOLOG-NET LH2 |
Part No.: 2706 |
|
|
|
With external T/rH probe
and mounting for the probe
Power supply possible with PoE or with mains appliance |
|
|
|
|
| Set consisting of: |
|
|
ECOLOG-NET LH2 Datalogger
humidity/temperature
with LAN communication |
Part No.: 2705 |
|
Plug on sensor: humidity
and temperature
|
Part No.: 3087 |
|
Adapter with mounting
for rH probe 3087
for connection to ECOLOG-NET xH2
|
Part No.: 3216-AD1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
 |
|
| ECOLOG-NET LA8 |
Part No.: 2720 |
|
|
|
|
8-Channel datalogger with
LAN interface and display |
|
|
8 universal inputs for
4..20mA transducers |
|
|
2 digital inputs for start
trigger, alarm delay/reset |
|
|
Multifunction alarm output:
LAN, LCD, buzzer, local connection |
|
|
Rugged, metallic case |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
| ECOLOG-NET Accessories |
|
|
|
|
Mounting set PoE-splitter
for ECOLOG-NET
Power over Ethernet cable (PoE)
|
Part No.: 2730-A |
|
For power supply on spare
wires only! |
|
|
Fullfils the standard
802.3af for spare wires only |
|
|
Before use, check the
swich or injector |
|
|
Mounting by ELPRO |
|
|
|
|
|
|
|
|
| |
Copyright © ELPRO / INT.GUNDULA.CH
Last changes: 09.05.06
Contact: |
|
|
|
|
|
|
|
|