D | E | F  
Climate technology
Applications: Acceptance report heater system | Acceptance of work | Building drying | Comfort | Pressure recording
 
  Datalogger for heating systems   Acceptance report after commissioning of heating system  
    The supply and return temperatures at the pipes below the insulation are measured. In addition, the outdoor and room temperatures are recorded.  
    Material:  
   
1x ECOLOG TN4-L Datenlogger LEMO connector 2422
2x Temperature probe NTC drop probe 3055-S03
1x Temperature probe NTC -50°C..+140°C 3090-S05
1x Temperature probe NTC -50°C..+140°C 3090-S15
 
   
 
  Datalogger for final inspections   Acceptance of work, final inspection report for customer  
    Subsequent to optimization of air conditioning and heating systems, humidity and temperature are recorded in various rooms.  
    Material:  
   
1x ECOLOG TH1 datalogger with one-year memory capacity 2423
1x ECOLOG TN2 datalogger 2420
 
 
  Datalogger for surveillance of building drying   Building drying in concrete buildings, humidity and temperature  
    The room climate condition is recorded with the integrated probe. The humidity in the concrete is measured in a bore hole D=15mm.  
    Material:  
   
1x ECOLOG TH1 datalogger with one-year memory capacity 2423
1x Plug-on universal probe humidity/temperature 3087
1x Extension cable for ECOLOG THx 3215-S05
1x Intermediate piece for ECOLOG THx 3215-DX
1x Bracket can be locked 2804-E
 
 
  Datalogger as measuring system for comfort documentation   Measuring system for comfort documentation  
    The complete system measures and documents all relevant climatic parameter needed for acceptance reports (ambient temperature, rel. humidity, low air flows, thermal radiation). The system is handy and therefore can be moved easily. As the datalogger is operating autonomously, only sensor power supply is needed.

 
    Material:  
   
1x HOTBOX SE universal datalogger 2501
1x Hygroclip sensor humidity / temperature 3088-A
1x Globe thermometer for measuring thermal radiation 3091-GLO
1x Air flow sensor, omni-directional, 0.01 - 1 m/s 3264-F
1x Tripod for mounting sensor, datalogger and accessories 2804-STA
 
   
  Datalogger for pressure recording   Pressure recording at compressor  
    For optimization, high pressure, low pressure and two temperatures are recorded simultaneously.  
    Material:  
   
1x HOTBOX SE universal datalogger 2501
1x Pressure sensor -1..9 bar 3280-A
1x Pressure sensor -1..24 bar 3280-B
1x Connector for 2 pressure transmitters 2540-P5
1x Mounting for 1-2 sensor at connector 2540-B
2x NTC temperature sensor -50°..140°C 3055-L03
1x Connector for 2 NTC sensors 2540-P4
1x Mounting for 1-2 sensor at connector 2540-B
 
       
  Copyright © ELPRO / INT.GUNDULA.CH
Last changes: 24.08.05
Contact: